Skip to main content
vanagon.com
SearchSavedAccount

The Vanagon Dictionary

Get to know your Volkswagen.

Look up Vanagon, EuroVan and Volkswagen Bus terms, then follow the definitions to their sources.

About the Dictionary and its data

Definitions and source records come from the shared Dictionary, which remains available at dictionary.vanagon.com.

API and data details

Results for “Reduction box”

6 public entries · page 1 of 1

  • Reduction box

    Transmission and drivetrain

    English · machine-assisted draft

    A reduction box is a component that reduces the speed of the output shaft.

    • transmission
    • drivetrain
  • Reduction Boxes

    Transmission and drivetrain

    English · machine-assisted draft

    Additional gear boxes used on swing-axle VW Buses to reduce transmission gearing

    • gearbox
    • swing-axle
  • Large Nut

    Transmission and drivetrain

    English · machine-assisted draft

    type of rear axle nut and reduction box design

    • axle
    • reduction
  • Small Nut

    Transmission and drivetrain

    English · machine-assisted draft

    Term referring to the smaller rear axle nut and reduction box design used in pre-1964 VW Buses

    • bus
    • vw
  • Country Buggy

    Vehicle models and history

    English · machine-assisted draft

    A vehicle produced in Australia from 1965 to 1968, using the Beetle engine and floor pan with Bus trailing arms and reduction boxes.

    • australia
    • beetle
    • bus
  • CV-joint

    Bus terminology

    English · source definition

    ( Constant Velocity Joint ) One of the small circular devices at an end of an axle on a bus . Buses , Vanagons , and EuroVans have four of these, while the Syncro Vanagons have a total of eight. These are necessary to allow the axle to move up and down while still turning to propel the car. the joints need to be keep greased to function properly. when they are worn, they make a knocking-noise that strikes fear into the hearts of bus owners everywhere. Microbuses do not have CV joints, but use a 'swing-axle' and reduction gear box instead.