Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Ignition wire slipping off?
Date:Tue, 8 Dec 1998 14:09:21 EST

Had this problem on my '85.  Just get a small screw driver and insert it into
the plastic housing and pry a little to bend the female spade connector
"fingers" back to where they should be.  Then push it back onto the male spade
connector on the startter and it should go on firmly and be good to go again.
Have fun.
Ken Wilford
Van-Again
John 3:16