Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: 87GL rebuild update (oil pressure)
From:Chuck Meanley
Date:Wed, 2 Dec 1998 00:11:09 EST

When doing a bottem end rebuild, two things are critical; a machinest you can
trust who will tell you the undersize and will normally provide the bearings
for you ( this is not the time to go cheap, buy the good ones, this rules out
any third world product) and something I haven't seen mentioned which is
plastigauge to check the machinest work and make sure everything is within
tolerance.
Chuck