Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Stuck bolt
From:Dave Richards
Date:Mon, 07 Jul 1997 01:10:01 -0400

Charles D Earl wrote:
> 
> Soak it with penetrating oil (many listees have said that "Kroil" works
> real well).  Without damaging the bolt head, give it a hard tap with a
> hammer (I use the round head of a ballpeen hammer).  This sometimes
> breaks the corrosion bond.  Try again.  Soak and repeat several times, if
> still no, try a piece of pipe or breaker bar.  Be careful, you might
> crank the head right off the bolt.  I would soak it for a few days before
> giving up.
> Good luck,
> 
> Charles
> '83.5 Westy
> '69 280 SE (back from the grave)
> 
> On Sun, 6 Jul 1997 RubatoGuy@aol.com wrote:
> 
> > In checking out my '88 Westy, I decided to take a look at the spare,
> > Unfortunately the 19mm bolt that hold the tray that the spare rests on does
> > not want to come off. Any clever ideas? I was thinking of just finding a
> > garage with an air wrench that I could talk a mechanic to applying to the
> > bolt.
> >Just a Thought! maybe the spare is oversize and is binding the bolt try 
a small jack under the pan to take the pressure off the bolt and then 
lots of leverage on the wrench
good luck
Dave WR3I 97 EVCamper