Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:re: 82 diesel head gasket
From:Robert Crawford
Date:Mon, 7 Oct 1996 18:31:55 -0700

>I am working on it now, I am takeing the head off and I have notoiced that
>there two holes in the head (near the hole off to the side, next to where
>the notches are)that are not in the head gasket (the bently book does not
>show holes there ether).
>Should I punch holes in the gasket to match the holes in the head?

        Well, I got it together and it ran.  I didn't punch the holes out
because I wasn't sure at the time that I was putting it together.  If I ever
have to replace the head gasket again I will punch the holes out.  Leaving
them pluged looks like it makes a hot spot between #2&3.

        One interesting thing is that after replaceing the head gasket and
timing belt is that it now seems to be a lot quieter (it's still a diesel,
but a quieter one).

        Of tools that I didn't plan on and had to go and get, I had to get a
6mm alen on a 3/8 socket in order to remove the V pulley on the crankshaft.

        I also found that the easest way to get to the V pulley was to
remove the muffler so now I need to get a muffler gasket.  Yes, even with a
torn muffler gasket it is still quieter than it was.

        Also, I am now able to add water the way the book says to, it
dosen't splash (read, geyser) back at me out of the pressure tank.

>

Robert Crawford

       "This year will go down in history.
	For the first time a civilized 
	nation has full gun registration!
	Our streets will be safer,
	our police more efficient,
	and the world will follow
	our lead into the future!"
			Adolf Hitler...1935