Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Electrical ?
From:Robert Ueltzen
Date:Sat, 29 Jun 2019 21:48:38 -0700

When my slider door doesn't unlock or lock with unlocking or locking of the
driver or front passenger door, it has usually been that the contact pins
are not making a good electrical contact with the plate.  I buff both with
a some fine sand paper or scotch pad and that usually solves my problem.

On Sat, Jun 29, 2019 at 9:19 PM OlRivrRat <OlRivrRat@comcast.net> wrote:

> On 29 Jun , 2019, at 9:22 PM, Dan N wrote:
>
> > hi Dean,
> >
> > also, by deduction... for example if you open/close the driver door -
> the passenger door + the sliding door open/close too - then the sender
> (driver door actuator) is good as it sends out the signal...
> >
> > so we deduct that the hatch actuator doesn't receive the signal... that
> the one to be fixed for not receiving the signal.
>
>         Unlocking or Locking either Front Door has No effect on Slider or
> Rear Hatch ~