Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: =?UTF-8?Q?Re=3A_Diesel_Engine_Position=3A_4=C2=BA_Angle_From_Centre_of?= =?UTF-8?Q?_Rear_Wheels?=
From:Bill Witz
Date:Fri, 27 Oct 2017 12:24:34 -0400

On Thu, 26 Oct 2017 19:56:43 -0700, Neil N <musomuso@GMAIL.COM> wrote:

>My apologies. I've been staring at an exhaustless engine for so long, I
>didn't even think about the muffler being in the way of measuring what
I'd
>requested. Only mildly embarrassing. haha. So.....
>
>For Vanagon owners with a diesel or gas VW inline gas engine mounted on
>diesel carrier bars, with the engine lid on if you put tape measure up
to
>bottom of engine lid, how far down is the centre of the crank pulley
from
>engine lid bottom?
>
>Thanks, again,
>
>Neil.
>
>
>--
>Neil n
>
>Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
>
>1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
>
>1981 Westfalia "Jaco" Images, technical
<http://tubaneil.googlepages.com/>
>
>Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>

I have about 11 3/16ths of an inch from center of pully to the bottom of
the engine cover.
hope this helps and good luck.
 Bill 84 Tiico Old  Paint.