Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Borescope: Inspect Transaxle 3/4 Slider Hub?
From:Neil N
Date:Tue, 1 Aug 2017 11:08:21 -0700

Hi all.

I only had a quick look at the Bentley manual but for a 1986+ 091/1
transaxle, could one use a borescope to inspect the transaxle 3/4
slider hub to see if it was the older failure prone part or the
updated part? Maybe put camera through the fill oil hole?

But then maybe it's impossible to view with the oil in the tranny?

Those borescopes sure look affordable these days. Not sure if this one
would be suitable but camera is only 0.33" OD. Amazon .ca

https://www.amazon.ca/Potensic-Semi-rigid-Inspection-Megapixels-Waterproof/dp/B06WLL26TF/ref=sr_1_4/147-2898271-1460048?ie=UTF8&qid=1501609933&sr=8-4&keywords=boroscope

Neil.

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>