Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Drive side swivel seat
From:Dennis Jowell
Date:Sat, 14 Feb 2015 06:19:54 -0500

Now there's an idea. Got to visualize that. 

Dennis Jowell
Scotch Hollow Farm
Newbury, Vermont 

> On Feb 13, 2015, at 8:04 PM, JordanVw@aol.com wrote:
> 
> In a message dated 2/13/2015 4:38:39 P.M. Eastern Standard Time, dennisjowell@GMAIL.COM writes:
> wanted to remove the driver side swivel seat bracket to allow room for battery controls and a aux. fuse box. Do I have to purchase seat brackets that the seat will slide on? I see bolts/nuts to remove the actual swivel part but can the runners for,the seat come off? I saw other list members who have done this. Any thoughts of what I should do?
> 
> Dennis
> 
>  
>  
> cut the welds to the bottom swival plate and weld a piano hinge down the one side. ive seen it done before. that way you can slide your seat out and then flip the swival base up to access underneath.