Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Radiator bleeder thread
From:Zoltan
Date:Sat, 29 May 2010 01:25:13 -0700

Metric does not give a number of thread per inch like imperial or standard
thread do.  Metric gives a number in mm that represents the distance between
one thread to the next, such as M8x1.25 or M6x1 or M10x1.75 etc.  There are
standard threads and there are fine threads.  For example M10x1 is a fine
thread.  They are used when something has to be held stronger.
Zoltan

----- Original Message -----
From: "Rob" <becida@COMCAST.NET>
To: <vanagon@GERRY.VANAGON.COM>
Sent: Friday, May 28, 2010 3:44 PM
Subject: Re: Radiator bleeder thread

> At  5/28/2010 03:25 PM,Rob wrote:
>>Does anyone on line know what the thread/size is for the radiator bleed
>>bolt?
>
> I found it, a round about way... m8x12, I'll take the stub I have
> left with me..
> http://translate.google.com.ar/translate?u=http://etka.auto2.ru/epc/cat/vw/BO/2005/403/&sl=ru&tl=en&hl=&ie=UTF-8
>
>
>
>
> Rob
> becida@comcast.net