Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Clutch pedal won't go to floor
From:John Morris
Date:Sun, 27 Sep 2009 10:14:45 -0400

Placing the clutch disk in backwards may cause this symptom.

John in NC

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Zoltan
Sent: Saturday, September 26, 2009 3:23 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Clutch pedal won't go to floor

Hi to all,
As you see on the headline, the pedal won't go to the floor.  This is not my
van.  I't an '88 van, the guy just changed the transmission and the clutch.
Maybe he has done something in the assembly process that causing this.  I
don't know, I never seen this happen.  The slave is good, the pedal starts
engaging high enough but it stops about two inches before the floor.
Anyone?
Zoltan