Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Bilstien install question
From:Jake Beaulieu
Date:Thu, 8 May 2008 23:53:00 -0400

On Thu, 8 May 2008 08:20:40 -0700, Aaron <a.robinson.lists@GMAIL.COM>
wrote:

"On the front shocks there was a metal "washer" that was around 3/8" thick
that fit on the shaft. When installing the shocks, this piece wouldn't fit
up into the shock protector that was in there, so I left it out. Was there
a reason for the part and did I do it improperly?"

I also installed sans the spacer.  I queeried the list at the time and
several folks confirmed they also installed the shocks without this
spacer.  No problems so far.

jake
82 westy