Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: major fuel leak
From:Vern in Bend
Date:Tue, 29 Jan 2008 14:51:59 -0800

>Or install the shift linkage rod after the tank is
>already in?  Or use flare fittings so a metal line
>could be attached to metal fittings?

>etc.

FWIW, on my '64 Corvair van and pickup, with similar layout of components
including fuel tank in the same location, the shift linkage is routed
through a tube, about 3" diameter, right through the tank.

This was the improved design after the earlier models experienced problems
with the linkage routed under the tank.

Vern