Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Rear evaperrater encloser
From:Karin Baker & Raymond Paquette
Date:Sat, 5 Jan 2008 09:00:52 -0500

I used fender washer on many of the screws.  Most of my broken plastic
pieces broke right at the screw holes.  So, I glued the pieces back
together, to keep the screw holes more or less intact.  The fender washers
support the area, since the glue wouldn't hold the weight.

Not as good looking as Joel's solution, but quite easy to do.  Maybe a
temporary patch, although mine has been that way for four years.

Raymond

On 1/5/08, Chris Snyder <Ccsvanagon@wmconnect.com> wrote:
>
> I am hoping some others here on the list have had this problem and can
> tell
> me how to fix it
>
> The problem is that in the back at the top where the evaporator for the
> A/C
> that enclosure is slipping down because the little plastic pieces on each
> side
> are breaking from age. You can push the whole assembly back up but, of
> course
> it won't stay.
>
> I need some direction as to how to secure it before it breaks away and
> comes
> crashing down with the evaporator and the rear speakers etc.
>
> This is on my 1987 Van with factory air.
>
> Hope someone can help me on this.
>
> Thanks again,
>
> Chris Snyder   </HTML>
>