Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Hall Sender question
From:Geza Polony
Date:Sat, 5 May 2007 19:53:06 -0400

Thanks for the tip--this worked great. It's worth adding for future readers
that you have to test the spark on the coil wire, not the spark plug wires,
as the distributor isn't turning while you do it.

My problem was on the sender side; not the sender itself, but the tiny wires
attached to the pins; one was off.