Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Brake switch swap procedure? 2nd try...
From:Roger Sisler
Date:Wed, 28 Feb 2007 17:20:54 -0500

Take the insturment cluster out. EZ access ,then. Undo the 4 attaching
screws, pull off the plugs from the dash switches,Unhook the speedo by
squeezing the two halves together(comes rightoff), unhook the main wiring
from the bottom and you are done.EX to reinstall.Only goes together one
way. Brake switches are right infront of you.