Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Cigarette Lighter socket..."tighter" ones available?
From:Matthew C. Huntley
Date:Fri, 22 Jul 2005 18:45:47 -0700

I just did one with a replacement from Pep boys.
It did not pull through the dash, I made jumpers because I did not want
to continue the tradition of hacking the wiring(PO).

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@GERRY.VANAGON.COM] On Behalf
Of Jeff Ensing
Sent: Friday, July 22, 2005 4:03 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Cigarette Lighter socket..."tighter" ones available?

I just now put one in from napa part#(782-1600) with the green  light
ring . It was to small and pulled through the dash hole but I solved
this by using a rad. fan switch crush washer to back it up with.
Perfect!     looks stock, and now works  with
 "normal "  accessaries.

I cut and replaced connectors but a set of adapter jumpers could be made
to preserve the wiring harness if you desired

jeffe
Atl. Ga.
1987' westy  weekender