Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: [vanagon] What type of adhesive do you use to replace a door seal...
Date:Mon, 7 Mar 2005 12:04:49 EST

In a message dated 3/7/05 8:13:36 AM Eastern Standard Time,
jonathan_dearman@hotmail.com writes:

> I recently bought a new passenger door seal for my 91 Westy.  Upon
> removing my old seal I noticed that VW had used an adhesive to keep
> the old seal in place.  So instead of asking this post first I was in
> a hurry and used contact cement on the door and seal and attemped to
> put them together.  It was a nightmare!  the seal is staying in there
> but I know it's not seated correctly and the door is difficult to
> close.  So my question is what type of adhesive is used to put door
> seals on, and if there is any special technique?

3M weatherstrip adhesive.  avaiable at any FLAPS
chris