Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Question about fuel injector hose
From:Pascal Giasson
Date:Mon, 3 Jan 2005 22:01:41 -0500

I used a small utility knife to cut the hose as far down into the metal
ferrule as I could, I was then able to pull the hose off the injectors with
the help of pliers.  Make sure you get the right high pressure FI fuel line
and FI fuel line clamps that have roles edges. (FYI I bought a complete kit
with instructions from Vanagain).

Pascal
'84 Westy

On Mon, 3 Jan 2005 11:52:07 -0600, Jim Felder <felder@KNOLOGY.NET> wrote:

>But when I get out to the injectors themselves, I see that on their very
short hoses there is
>a band clamp on one end but the other is swaged into a cup-like metal
>ferrule.
>
>On account of that ferrule, how does one deal with replacing that final
>bit of hose?
>