Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Front heater core / Screw Removal
From:George Goff
Date:Wed, 10 Sep 2003 00:25:22 EDT

In a message dated 9/9/03 1:46:22 PM, drillock@EARTHLINK.NET writes:

<< The 2 bolts can be removed with vise grips. >>

Or, if you have an adept touch with power tools, the fastener heads can be
slotted with a small cutoff wheel mounted to a die grinder.  Then, the screws
can be removed with a stout, flat-bladed screwdriver.  If you are really cheap,
the now slotted screws can even be used again.

George