Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: CO adjustment
Date:Mon, 7 Jul 2003 07:57:43 -0400

John;
I would double check the three alignments associated with
the throttle body as outlined i the Bentley. Especially the
idle position sensor.

----- Original Message Follows -----
> On a fairly new rebuilt 1.9 '84 digijet, installed a
> rebuilt AFM.  Now about 10% of the time when I decelerate
> to idle, the engine stops.  O2 sensor is also new, timing
> is OK, no vacuum leaks.  I'm guessing maybe a CO
> adjustment. Any advise or suggestions?

Ken Lewis
86 Transporter Crew Cab, 60 T-5 Coupe
http://neksiwel.20m.com/   O2 sensor monitor, my cars,
Vanagon Tech
http://EB03.20m.com/  Everybus 2003 pictures
To reply remove the letters "no" in the begining of my
address if they appear (due to spammers).