Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Easy out for ball joint removal - Must have tools: make it easy: AVOID the FORK
From:Robert Lilley
Date:Wed, 4 Jun 2003 21:46:28 EDT

Two tools that will make front end work a dream are:
a Pitman arm puller and a tie rod end puller.  They get the tie rods ends and
upper and lower ball joints out with NO struggle...
Once the lower arm is free have a shop press in new lower ball joints and put
it back together.

Ball joint forks are a hit or miss solution, they might work for some but
others they just make matters worse.  Just buy or rent the two tools and it makes
getting joints out of the spindle real easy.

Did I say it makes it real easy?

Get them from your local FLAPS...

Robert