Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Removing Stuck 1.6L Diesel Injector Heat Shields - Any Ideas?
From:Mike Catlin
Date:Wed, 12 Sep 2001 20:45:56 -0700

jmileham wrote:
> Anyone have any ideas on how to get the two stuck
> heat shields out of my diesel Westy?

I used a 6mm-1.0 tap to cut a couple turns of
threads in the center hole of the stuck heat
shield.  Then, using a stack of various washers
and a bolt, I was able to pull the heat shield
free by threading the bolt through the newly
tapped threads and tightening it a bit.  You need
washers larger than the injector hole and a
smaller one to keep the bolt head from going
through the hole in the big washer.

Mike Catlin
Davis, Calif.