Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Broken Exhaust Manifold Bolts
From:Todd Last
Date:Mon, 26 Jun 2000 18:34:18 -0400

I had the same thing done on my '88 Westy. I had a mechanic do it, and
he did not remove the head. Did not look like a fun job - and it was on a 2WD

Todd
'88 Westy
JKrevnov@aol.com wrote:
> In a message dated 6/26/00 12:39:35 PM, jrasite@eoni.com writes:
>

Jim,
I Helicoiled (if there is such a verb) a stud hole on each side of the
forward exhaust ports without removing the engine.  I do not recall if they
were the upper or lower or one of each.  It was a royal pain in the ass but,
I did them in place.  This was on a stick shift 2WD.  It has been about 7
years since I did it so, if any more of the details come to mind, I'll let
you know.
Rich