Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Wheel studs- How to change.
From:Larry Hamm
Date:Sat, 14 Aug 1999 13:39:19 -0600

Mike Ray wrote:
>
> OK, Got my Porsche Wheel studs for the rear of the Vanagon
> Can the studs be removed with a hammer or do I have to remove the Hub and
> press them out?
>

Mikey,
Shoot a bit of WD-40 around the base of the studs, front and back, screw
a sacrificial nut onto the stud, just nearly flush with the outer end,
and tap out with a hammer. You may want to remove the nut while the stud
still has some grip, depending on how hard you had to "tap" it. Hope
this helps,
Larry