Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Crimp tools
From:Karl Batzler
Date:Sun, 31 Jan 1999 18:29:48 -0800

Walt says:
>My crimping tool is German made, but the brand name is worn off of the
handle. Search out specialty tool suppliers.
Either Knipex or Hazet...there is also a good American made one at Home
Depot.  It's about $18, but well worth it.
P.S. Avoid Taiwan or Chinese made tools as they don't hold up well...too
much carbon in the steel makes tools too brittle.
Karl Batzler
84 Vanagon
87 Audi 5000 S
La Quinta, CA
-----Original Message-----
From: Walt Spak <wnsopc3@3RDM.NET>
To: vanagon@GERRY.VANAGON.COM <vanagon@GERRY.VANAGON.COM>
Date: Sunday, January 31, 1999 7:18 AM
Subject: Re: Soldered Connections