Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Sliding Door Handle Cylinder Replacement-lock cylinder removal
From:Karl Mullendore
Date:Wed, 5 Aug 1998 23:15:27 EDT

Look at the handle very closely,on the round portion-you should see a tiny
spot of a sealing compound,which you need to dig out VERY CAREFULLY.Then you
will need a tiny flat-bladed screwdriver(like a jeweler's type)to unscrew a
tiny locking screw  that holds the cylinder in place.Remove the lock cylinder
with the key installed to minimize the chance of losing all the tiny cylinder
pieces.Good Luck!

Karl