Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Thanks and New Problem (Heads and Cylinders)
From:Ian Cameron
Date:Fri, 10 Jul 1998 11:44:58 -0700

At 05:37 PM 7/9/98 EDT, KENWILFY@AOL.COM wrote:
 I am
>going to be attempting the opposite, putting a cylinder over a piston and I
>figure they must make a tool to do this one but I have no idea what it would
>be called or how it would work.
>Any help with this one?

You really should replace the rings while you've got the engine apart, so
take the cylinders to a shop and have the ridges removed.  While you're at
it, have the cylinders miked to see if they need grinding, and if not have
them honed.  Then you can replace the pistons in the usual way.