Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Fan switch/wiring (was No Subject)
Date:Thu, 7 Dec 1995 17:23:37 -0500

In a message dated 95-12-05 01:14:59 EST, GOLDBERG_DAVID@mpd.tandem.com
writes:

>
>The PO added a 12v fan to the Westy. The problem is that when the fan is run
>for a while the switch gets hot. My guess is that the wires are too small.
>would putting lower resistance wires fix the problem? or is it something
>else?
>
>Waiting in stale air,

My guess ids that if the switch is too hot, then it is the switch that is too
small.  Switches are rated according to their current carrying capacity and
the switch may well be under sized for the fan's current draw requirements.
 As for the wire, is the wire warm or the insulation getting discolored or
brittle?  These are signs of undersized wire.

Good luck,
Jim Davis
87 Syncro
88 Wolfsburg