Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Ebersparker (SP?) heater for 1970 Westie
Date:Mon, 27 Feb 1995 15:21:59 -0600

>At the Palo Alto swapmeet Yesterday .I got myself a good working ebersparker.
>But there is a problem.
>
>The westie has a spare wheel well just where the heater is meant to go.  Does
>one just cut away at the bottom of the spare wheel well and put the spare
>wheel on the front of the bus. Shoud the cut-off wheel well be filled with
>plywood say 1/2 " thick or a piece of pop-riveted sheet metal.

I would use sheet metal for fire proofing -

>Should the heater connect to the regular heater so that is works as a
>defroster and everything or should the heat just get into the bus under the
>rear seat?

You should get the ductwork that routes thru the firewall, past the gas tank 
and behind and under the back seat.  There is also a cable that runs to the 
front seat and a special timer switch on the dash.

I just took a unit out of my parts Westy and sold it.  I keep my Westy off 
the road in winter.

Ron Jurgens

70' Westy (2)
69' Sunbug
72' SqBk
73' SqBk