Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Break-in oil..replying from digest.
From:Matt Roberds
Date:Mon, 7 May 2007 23:43:34 -0500

> From:    Don Hanson <dhanson@GORGE.NET>
> Date:    Mon, 7 May 2007 11:26:37 -0700
>
> Another thing I've learned from my racecar motors is that cutting open
> your old oil filter and checking for metal specks is good practice.

The airplane people do this as a regular thing.  The tool is basically
like a giant tubing cutter - a little cutting wheel that you rotate
against the side of the filter - so you can get through the metal
without putting lots of additional metal bits into the filter.

Like everything else associated with airplanes, it ain't cheap.
http://www.aircraftspruce.com/menus/to/oilfiltertools.html shows
various kinds.  A local hot-rod shop may also carry this kind of tool.

If you have access to a lathe with chuck jaws big enough to hold your
oil filter, you can also cut them open that way.

Matt Roberds