Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: burred spark plug threads
From:Keith Hughes
Date:Thu, 19 Jan 2006 13:54:21 -0700

Jake,

Remember to put some heavy duty axle grease on the thread chaser also.
The grease will capture the shavings to keep them from going into the
cylinder.  Turn in about a half-turn, then back out about a 1/4 turn to
clear the shavings, and just keep going slowly.  Pretty easy really.

Keith Hughes

>------------------------------
>
>Date:    Thu, 19 Jan 2006 11:58:05 -0600
>From:    Raceingcajun <raceingcajun47@BELLSOUTH.NET>
>Subject: Re: burred spark plug threads
>
>Jake,
>
>    There is 14 MM and older Fo*ds used 18 MM size threads. You have 14 MM.
>Any good "Flaps" should have a thread chaser, use that instead of a tap. Go
>very slow, by hand until you get it started.
>    Good luck.
>
>