Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:replacing the waterpump, opportunity to replace hoses
From:gary hradek
Date:Thu, 31 Oct 2002 12:10:39 -0800

This is the last of the 5 post I promised on replacing
the waterpump.   The very first thing that you remove
on the pump is the pulley.   The bolts holding the
pulley on can be very tight.   An easy trick is to use
two tools, I prefer two 5 point sockets on 3/8 inch
drives and work one bolt agains another to remove the
first two.   First two are easy but that leaves you
with the last one which by now is the tightest.   Easy
solution here is to find a long bolt with the same
thread as the ones you removed and screw it into the
pump as far as possible, turn the pulley so that the
long bolt hits the pump and take out the last bolt.
           have a good weekend all, gary

__________________________________________________
Do you Yahoo!?
HotJobs - Search new jobs daily now
http://hotjobs.yahoo.com/