Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Syncro Tranny Drain
From:George Goff
Date:Sun, 29 Sep 2002 00:02:24 EDT

In a message dated 9/28/02 4:21:02 PM, mtbiker62@HOTMAIL.COM writes:

<< My skid plate sits 1/2" from the bottom-middle of the plug. Even if
I could get a hex wrench on it I'm not so sure it would be able to come out
due the proximity to the skid plate. I don't see access except by removing
the skid plate!! Is that it?>>

Don't worry, it will come out . . . once you crack it loose.  I used to use a
wrench I made dedicated for this job.  Now, I still use the wrench, but I
first drop the protection rails.  The time spent dropping the rails is more
than recovered by the ease of doing the job and cleaning up the mess.

<<Also, looks to me like some sort of pump with flexable hose to refill would
be the easiest? >>

You don't need a pump; you just need a hose long enough to snake to the
outside from the depths of the Underworld and some patience.

George