Skip to main content
vanagon.com
SearchSavedAccount
← vanagon.com home · Continue the discussion in the forum
Subject:Re: CV Boot replacement..
From:Rico Sapolich
Date:Tue, 20 Mar 2001 07:51:52 EST

In a message dated 3/19/01 11:39:03 PM, turbovans@JUNO.COM writes:

<< 1.  if you have 6 - point allen CV joint scews do not
  install them back in but instead get the later type
  12- point allen screws - they never strip out,
and the 6-pointers always do. >>

I diagree.  Using a quality driver whether it is a hex socket or a tri-square
and making sure it is FULLY inserted into the socket will give the desired
result.

Rich